UPS Systems

While a MOV is designed to conduct significant power for very short durations (~8/20 microseconds), such as caused by lightning strikes, it typically does not have the capacity to conduct sustained energy. Under normal utility voltage conditions, this is not a problem. However, certain types of faults on the utility power grid can result in sustained over-voltage conditions

The RFC coax unit is a transient suppression device designed to protect RF transceivers. It can be used for frequencies of up to 1GHz with negligible signal loss. The standard device is supplied fitted with “N” type female connectors. Other connector configurations are available on request. The unit is supplied in a compact housing with a removable gas discharge tube (GDT) for easy inspection / replacement.

The RS232 line conditioners are used to protect the RS232/V.24 protocol. These compact devices are fitted into a standard gender bender housing with a DB25 or DB9 connector configuration. (Male to equipment, female to line). Reversed genders are also offered as a standard as indicated in the part number listing below.

The ACCESS CONDITIONER is designed to protect data and control lines for automatic gate systems intecoms and alarm systems. The unit will handle data speeds in excess of 20 kbps with insertion losses of less than 0.1dB. For simple installation the unit is fitted with screw type terminal blocks and is available in a ten line configuration. Standard voltages available are 5 to 48Vdc. Other voltages are available on request.

The MAINS POWER, AERIAL & DSTV LINE TRANSIENT CONDITIONER combines powerful protection circuitry (suppression and filtration) for mains and TV / DSTV aerials (suppression only). Standard modules are fitted with a 16A plug / socket, two TV sockets (female) and two F type sockets for DSTV (female). Male to male patch leads are supplied for both the TV and DSTV aerials.

The single or three phase POWER CONDITIONER – HIGH CURRENT units combine both surge / transient suppression and EMI / RFI filtration and come standard with circuit breakers. The unit is supplied in a wall mountable housing with a hinged lockable door. These modular units are fully serviceable and are available with either 40kA or 100kA suppression modules on the primary side. These units are ideal for protection of high cost hospital equipment i.e. CAT / MRI scanners, computer rooms etc.

The POWER CONDITIONER CAN combines both surge / transient suppression and EMI / RFI filtration. This high performance device is designed for the protection of sensitive electronic / electrical equipment against transients transmitted via the mains lines. It is also widely used for the protection of gate motors. The unit is housed in a compact can for easy fitment into electrical / electronic enclosures. The unit may also be mounted on a Din Rail by means of a Din Rail mounting bracket. The POWER CONDITIONER CAN is available in an Econo version which has a noise attenuation of -45db or a High performance version with noise attenuation of -100db.

The protector is used to protect any electronic device eg printers, fax machines, answering machines, modems, alarm panels and TV’s etc.